Features
Specially Designed for OEM Use Battery Eliminator / Float Charger Output Voltage Adjustability ±10% Quality Components and Conservative Ratings for High Reliability and Long Life High Regulation, Low Ripple and Noise Suitable for Bench / Rack Use

Technical Specifications
INPUT VOLTAGE	230V AC ±10%. Single phase 50Hz.
OUTPUT VOLTAGE AND CURRENT	See Selection Guide.
Adjustability	±10% of rated voltage.
Regulation	Line : 0.05%. * Load : 0.05%. *
Ripple & Noise	1mV rms.
Protection	Overload & short circuit.
Stability	0.3%. **
Transient Recovery	100µsec.
Remote Sensing	Provided for all models with 5A and above.
NOTE	Load Regulation to be measured at sense terminals. * For 5V Power Supplies 0.05% +1.5mV ** For 5V Power Supplies 0.03% +15mV Built-in Crowbar Type Over Voltage Protection for 5V Power Supply. All power supply with Built-in Mains cord.
OPTION AT EXTRA COST	* OVP Crow Bar Type * 3 Digit DPM for V&I * Input 115 Volts 50Hz Single Phase * 19” Rack Adaptable for width of PS with 430 mm.

Selection Guide
	DC Output		Dimensions W x H x D (mm)	Model
	Voltage	Current
5V	4.5 to 5.5V	2A	133 x 133 x 250	FL0502
	4.5 to 5.5V	5A	133 x 133 x 250	FL0505
	4.5 to 5.5V	10A	210 x 133 x 250	FL0510
12V	10.8 to 13.2V	2A	133 x 133 x 250	FL1202
	10.8 to 13.2V	5A	210 x 133 x 250	FL1205
	10.8 to 13.2V	10A	285 x 133 x 250	FL1210
±15V Dual Tracking	±13.5 to ±16.5V	1A	133 x 133 x 250	FD1501
	±13.5 to ±16.5V	2A	210 x 133 x 250	FD1502
	±13.5 to ±16.5V	5A	430 x 133 x 250	FD1505
24V	21.6 to 26.4V	1A	133 x 133 x 250	FL2401
	21.6 to 26.4V	2A	210 x 133 x 250	FL2402
	21.6 to 26.4V	5A	285 x 133 x 250	FL2405
	21.6 to 26.4V	10A	430 x 133 x 300	FL2410
	21.6 to 26.4V	20A	430 x 133 x 450	FL2420
48V	43.2 to 52.8V	2A	285 x 133 x 250	FL4802
	43.2 to 52.8V	5A	430 x 133 x 250	FL4805
	43.2 to 52.8V	10A	430 x 133 x 450	FL4810
	43.2 to 52.8V	20A	430 x 177 x 450	FL4820