| |
| Features |
|
 |
- Ultimate
Reliability - for your precious and critical equipment.
-
Maximum
Overload Capability - no need for oversized UPS to handle
heavy start up loads.
- Total
Rated Power - at ambient as high as 50°C.
- Complete
Isolation - of load for maximum protection.
- Man-Machine
Interface - user friendly UD Display and controls.
- State
of the Art Digital - technology using IGBT based technique.
- High
Power Density - upto 2000VA/Cft.
-
Smallest
Footprint
- and quiet operation, ideal for computer environment.
- True
On-line - precise sine wave system.
- Highest
Crest Factor - handling capability upto 5:1.
- Better
Efficiency - means lower running cost.
|
|
The
RHINO-Series is an immensely reliable Power Protection Solution
to cater to highly abnormal power environment, offering benefits
beyond expectations. The systems are designed for highest reliability
standards and imaginatively engineered for effective thermal management,
as well as to provide top quality power with unbelievable MTBF
figure. The construction is as rugged as a Rhino, the nature’s
magnificent creation. |
|
| The
RHINO-Series has been designed taking into account the ever-changing
needs of Information Technology, Telecom, Medical and Industrial
applications. The innovative high frequency digital PWM technology
offers top quality power and reduces cost of operation, transit,
and installation. |
| Technical
Specifications |
| MODEL |
|
R1020 |
R1030 |
R1050 |
R1075 |
| RATED POWER1 |
|
2.0KVA |
3.0KVA |
5.0KVA |
7.5KVA |
| INPUT |
Voltage2 |
160V
AC to 265V AC, 50Hz, Single Phase. |
| Frequency |
50Hz
±3Hz. |
| OUTPUT |
Voltage |
220V
AC / 230V AC / 240V AC (Any One Voltage) Single Phase. |
| Frequency |
50Hz
& ±0.5% (Free Running), 50Hz ±3Hz (Sync Mode). |
| Regulation |
±1%
(Typical). |
| Transient Response |
±5%
for 100% Load Variation, correction in 10mSec. |
| Inverter Technology |
PWM
(IGBT). |
| Waveform |
Pure
Sinewave, THD <2% (Linear Load). |
| Short Term
Overload |
110%
for 30 min, 150% for 10 secs., 200% for 5 cycles, 400% for ½
cycle. |
| Efficiency
(Peak) |
Inverter
>92%, AC to AC >85% (Linear Load). |
| Load Power
Factor |
0.6
to Unity. |
| Change Over |
Transfer
Time (in Sync Mode) less than 5 msec. |
| BATTERY |
Type |
Sealed
Maintenance Free / Lead Acid Tubular (User’s Choice). |
| DC Voltage |
180V
DC (15 Nos./12V DC each). |
| Backup Time |
Typically
30 min to 2 hrs. (Higher Back up Time on request). |
| Recharge Time |
10
to 12 hrs. |
| Life |
Typically
800 cycles for SMF/5-7 years for LATB (as specified by mfr.). |
| GENERAL |
Protections |
Mains
Over/Under Voltage, DC Over/Under Voltage,
Inverter Over/Under Voltage, Inverter Overload, Overheat,
Built-in Soft/ Cold Start, Snubber Circuits for Devices. |
| LED
Indicators |
Mains
On, Inverter On, Battery On Charge, Mains Over/UnderVoltage,
Low Battery Imminent, DC Over/Under Voltage, Inverter Overload,
Overheat, Inverter Over/Under Voltage, Load On Inverter,
Load On Aux. Supply |
| Digital Metering |
16x2
LCD for I/P & O/P Volts, DC Volts, O/P Amps,
Frequency & % Battery. |
| Audible Alarm |
Built-in
Buzzer Operates on Fault Conditions. |
| Isolation |
UPS
Output is Isolated from Mains Input. |
| PC Interface |
RS232/Relay
interface (D9 female) compatible on popular software platforms. |
| Protection
Class |
IP-21. |
| Finish |
DA
Grey IS632. |
| Weight (Kgs.) |
50
(approx.) |
54
(approx.) |
85
(approx.) |
95
(approx.) |
| Dimensions(WxDxH) |
300
x 600 x 500 |
300
x 600 x 500 |
375
x 600 x 600 |
375
x 600 x 600 |
| Temperature |
0ºC
- 45ºC (50ºC Peak). |
| Humidity |
0
- 95% RH (Non Condensing). |
| 1 |
At PF 0.7. |
| 2 |
Below 175V
AC in battery sharing mode. |
| * |
10KVA UPS in
this range on request (Model No. R1100). |
|
|
