Low Distortion Signal Generator   Model 2014
  
     
 
Features
 Model 2014
  • Wide Frequency Range from 1Hz to 1MHz
  • Low Harmonic Distortion for Sinewave
  • Sine & Square wave Output
  • Use of Thermistor provides Higher AVC
    Gain and Flat Frequency Response
  • Better Frequency Stability
  • Built-in Attenuator upto 60dB in 20, 40,
    60 dB steps
  • Maximum Sine Wave Output of 30Vp-p
  • Maximum Square Wave Output of 20Vp-p
  • Rise and Fall Time <100ns
  • Compact and Portable
Technical Specifications
Frequency Range 1Hz to 1MHz in 6 decade ranges.
1Hz to 10Hz
10Hz to 100Hz
100Hz to 1KHz
1KHz to 10KHz
10KHz to 100KHz
100KHz to 1MHz.
Frequency Indication Dial.
Frequency Accuracy ±5% of the setting.
Max. Output Voltage
at 1KHz		  
Sine 10V rms ±1V rms.
Square 20V p-p or above.
Attenuator 4 steps corresponding to 0dB, 20dB, 40dB, 60dB.
Accuracy within ±1dB at 1KHz.
Attenuator Output
Impedance 		600 ohms ±5% (at 20dB, 40dB, 60dB attenuation).
Amplitude Change with Frequency For sine wave (checked at 10V rms w.r.t. 1KHz).
1Hz to 1MHz: ±1.0dB.
Sine Wave Distortion <0.05% in the range from 400Hz to 20KHz.
<0.2% in the range from 200Hz to 40KHz.
<0.4% in the range from 40Hz to 100KHz
<1.5% in the range from 10Hz to 300KHz.
Rise and Fall Time
(Square Wave) 		<100ns (valid only at max output).
Input Supply 230V AC ±10%, 50Hz.
Dimensions 100 (H) x 250 (L) x 280 (D) mm.
Weight 3 Kg. (approx.).
Standard Accessories 1. Banana to Crocodile Cable - 1 No.
2. Operation Manual - 1 No.
 

  BACK