| Technical
Specifications |
| RF
SIGNAL GENERATOR |
| Carier
Signal |
100KHz
to 110MHz. |
| Modulation
AM Signal |
100KHz
to 72MHz in 7 bands and continuously variable over the whole range
with a coarse & fine control. |
| Modulation
Frequency |
Selectable
400Hz / 1KHz. |
| Modulation
Depth |
a)
Internal Modulation : 30%.
b) External Modulation adjustable. |
| Output
Amplitude |
>200mV
p-p at 75 ohms. |
| Attenuation |
0dB
/ 20dB and continuously variable 20dB (approx.). |
| FM
Signal |
30MHz
to 110MHz. |
| Modulation
Frequency |
Selectable
400Hz / 1KHz. |
| Frequency
Modulation |
a)
Internal - 30KHz (approx.).
b) External - 50Hz to 10KHz adjustable. |
| Output
Amplitude |
>200mV
p-p at 75 ohms. |
| Attenuation |
0dB
/ 20dB and continuously variable 20dB (approx.). |
| FREQUENCY
COUNTER |
| Display |
5
digit, 0.3" LED display. |
| Frequency
Range |
10Hz
to 100MHz. |
| Range
Selection |
Hz
/ KHz / MHz selection is automatic depending on mode selected. |
| Source
Selection |
Internal
FM / AM / Internal Function / External Frequency- Logic selected. |
| Annunciation |
GATE,
OVERFLOW, Hz, KHz, MHz, INT AM/FM, FUNCTION, EXT FREQUENCY. |
| Gate
Period |
0.1
sec & 1 sec by LED indication for ext. counter mode. |
| Hz
/ KHz / MHz |
Units
by LED indication. |
| Mode |
Selected
mode by LED. |
| Annunciators |
Indication
for Function Generator.
RF Generator & Ext Counter. |
| Sensitivity |
20mV
rms. |
| FUNCTION
GENERATOR |
| Frequency |
1Hz
to 1MHz. |
| Waveforms |
Sine,
Square, Triangular, + Pulse, - Pulse, Ramp. |
| Amplitude |
30V
p-p at 600 ohms & 50 ohms terminal. |
| Attenuation |
3
x 20 dB step & 20 dB continuously variable. |
| Output
Impedance |
600
ohms, 50 ohms. |
| DC
Offset |
0
to ±15V max. |
| Sinewave
Distortion |
<3%. |
| Pulse
Duty Cycle |
10%
to 90% variable. |
| Symmetry
on/off |
In
off mode 50% duty cycle. |
| POWER
SUPPLY |
| Reg.
DC Power Supply |
0
to 30V / 2 Amp with ON/OFF switchable. |
| Display |
3
digit, 0.5" LED display for voltage or current switchable. |
| Voltage |
Coarse
& Fine control. |
| Current |
0
to 2 Amp. |
| Load
Regulation |
0.1%. |
| Ripple |
<5mV. |
| Current
Limit |
Desired
current setting. |
| Current
Limit LED |
Indicates
when current limit is reached. |
| GENERAL |
| Power |
115/230V
AC ±10%, 47-65Hz, 125VA (max.). |
| Dimensions |
360
(W) x 185 (H) x 375 (D) mm. |
| Weight |
11
Kgs. approx. |
