Features
Wide Frequency Range from 0.2Hz to 2MHz Sine, Triangle, Square, Pulse, Ramp, TTL & Sweep Output Variable Time Symmetry for Pulse & Ramp Waveform Variable DC Offset Control	20dB x 2 Attenuator Output Overload Protection VCF Input LOG \ LIN Sweep Mode

Technical Specifications
Frequency Characteristics
Range	0.2Hz to 2MHz.
Dial Accuracy	±5%.
Waveform Characteristics
Output Waveforms	Sine, Triangle, Square, Pulse, Ramp, TTL.
Symmetry / Duty Cycle	10% to 90% Cont. variable for asymmetric waveforms like Pulse & Ramp ( Upto 200KHz only).
Sinewave Distortion	<1% from 20Hz to 200KHz.
Triangle Linearity	98% upto 100KHz, 95% above 100KHz.
Square Rise / Fall Time	<100ns.
Output Characteristics
Amplitude	20Vp-p (Open Circuit), 10Vp-p (into 50 Ohm Load).
Attenuator	20 ±1dB.x 2, 20dB cont. variable.
Output DC Offset	±10V open circuit, ±5V into 50 Ohm load (dc ± ac peak).
Output Impedance	50 Ohms ±5%.
Protection	Short circuit protected.
TTL Output
Rise/Fall Time	<25ns.
Level	Standard TTL.
VCF Characteristics
VCF Input	0 to 10V for Full Range.
VCF Input Impedance	10K Ohm, ±10%.
Sweep Characteristics
Sweep Mode	Internal / External.
Sweep Type	Linear, Log.
Sweep Time	0.5s to 30s Variable.
Sweep Width	100 : 1 Variable.
Power Source	115V / 230V ±10%, 50 / 60 Hz AC.