| |
| Features |
|
- Wide Frequency
Range from 0.2Hz to 2MHz
- 4 Digit
Frequency Counter (Internal Only)
- Sine,
Triangle, Square, Pulse, Ramp, TTL & CMOS Output
- Variable
Time Symmetry for Pulse & Ramp waveform
|
- Variable
DC Offset Control
- 20dB Attenuator
- Output
Overload Protection
- VCF Input
|
| Technical
Specifications |
| Frequency
Characteristics |
|
| Range |
0.2Hz to 2MHz. |
| Waveform
Characteristics |
|
| Output Waveforms |
Sine, Triangle,
Square, Pulse, Ramp, TTL & CMOS. |
| Symmetry
/ Duty Cycle |
10% to 90%
Cont. variable for asymmetric waveforms like Pulse & Ramp (Upto
200KHz only). |
| Sinewave
Distortion |
<1% from
20Hz to 200KHz. |
| Triangle
Linearity |
98% upto 100KHz,
95% above 100KHz. |
| Square
Rise / Fall Time |
<100ns. |
| Output
Characteristics |
|
| Amplitude |
20Vp-p (Open
Circuit), 10Vp-p (into 50 Ohm Load). |
| Attenuator |
20 ±1dB,
20dB cont. variable. |
| Output
DC Offset |
±10V
open circuit, ±5V into
50 Ohm load (dc ± ac peak). |
| Output
Impedance |
50 Ohms ±5%. |
| Protection |
Short circuit
protected. |
| TTL
Output |
|
| Rise
/ Fall Time |
<25ns. |
| Level |
Standard TTL. |
| CMOS
Output |
|
| Rise/Fall
Time |
<120ns (at
max level). |
| Level |
4V to 14V,
±1 Vp-p Cont. Variable. |
| VCF
Characteristics |
|
| VCF
Input |
0 to 10V for
Full Range. |
| VCF
Input Impedance |
10K Ohm, ±10%. |
| Frequency
Counter |
|
| Mode |
Internal. |
| Display |
4 Digit 7 Seg
Display. |
| Internal
Mode Range |
0.2Hz to 2MHz. |
| Accuracy |
Time Base Accuracy
±1 count. |
| Time
Base |
±50ppm
@ 25 deg C after 30 min warmup. |
| Power
Source |
115V / 230V
±10%, 50 / 60 Hz AC. |
|
|
