| |
| Features |
|
- Wide Frequency
Range from 1Hz to 10MHz
- 6 Digit
Frequency Counter
- 10Hz to
100MHz External Frequency Counter
- Sine,
Triangle, Square, Pulse, Ramp, TTL, CMOS & Sweep Output
- Variable
Time Symmetry for Pulse & Ramp waveform
|
- Variable
DC Offset Control
- 20dB x
2 Attenuator
- Output
Overload Protection
- VCF Input
- LOG \
LIN Sweep Mode
|
| Technical
Specifications |
| Frequency
Characteristics |
|
| Range |
1Hz to 10MHz. |
| Waveform
Characteristics |
|
| Output Waveforms |
Sine, Triangle,
Square, Pulse, Ramp, TTL, CMOS. |
| Symmetry /
Duty |
10% to 90%
Cont. variable Cycle for asymmetric waveforms like Pulse & Ramp
(upto 1MHz only). |
| Sinewave Distortion |
<1% from
20 Hz to 200 KHz. |
| Triangle Linearity |
98% upto 100KHz,
95% above 100KHz. |
| Square Rise
/ Fall Time |
<35ns. |
| Output
Characteristics |
|
| Amplitude |
20Vp-p (Open
Circuit), 10Vp-p (into 50 Ohm Load). |
| Attenuator |
20 ±1dB
x 2, 20dB cont. variable. |
| Output DC Offset |
±10V
open circuit, ±5V into 50 Ohm load (dc ± ac peak). |
| Output Impedance |
50 Ohms ±5%. |
| Protection |
Short circuit
protected. |
| TTL
Output |
|
| Rise / Fall
Time |
<25ns. |
| Level |
Standard TTL. |
| CMOS
Output |
|
| Rise / Fall
Time |
<120ns (at
max level). |
| Level |
4V to 14V,
±1V p-p Cont. Variable. |
| VCF
Characteristics |
|
| VCF Input |
0 to 10V for
Full Range. |
| VCF Input Impedance |
10K Ohm, ±10%. |
| Sweep
Characteristics |
|
| Sweep Mode |
Internal /
External. |
| Sweep Type |
Linear, Log. |
| Sweep Time |
0.5s to 30s
Variable. |
| Sweep Width |
100 : 1 Variable. |
| Frequency
Counter |
|
| Mode |
Internal /
External Switch Selectable. |
| Display |
6 Digit 7 Seg
Display. |
| Internal Mode
Range |
1Hz to 10MHz. |
| External Mode
Range |
10Hz to 100MHz. |
| Accuracy |
Time Base Accuracy
±1 count. |
| Time Base |
±50ppm
@ 25 deg C after 30 min warmup. |
| Input Impedance |
1Mohm || 150
pF. |
| Ext. Input
Sensitivity |
<50mVrms
(typically 20mVrms). |
| Power
Source |
115V / 230V
±10%, 50 / 60 Hz AC. |
|
|
